Gai-tronics 701-904 SmartSeries Handset/Speaker Amplifier with User Manual download pdf

Quick Installation Guide Pub. 42004-719L2BQG

GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA

610-777-1374  800-492-1212  Fax: 610-796-5954

ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

701-904 SmartSeries Handset/Speaker Amplifier with Auxiliary Jack

General Information

This manual is provided as a simple installation guide for the 701-904 SmartSeries Handset/Speaker Amplifier with Auxiliary Jack. For the complete

installation, operation and maintenance manual please visit http://www.gai-tronics.com/manuals.

Temperature range.............................................................................................................. −22º F to +158º F (−30º C to +70º C), operating and storage

Dimensions.................................................................................................................. 8.12 H × 8.12 W × 6.12 D inches (206 × 206 × 155 mm), overall

Shipping weight..........................................................................................................................................................................................7.1 lbs (3.2 kg)

Installation

CAUTION

This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-hazardous locations only

when used with listed GAI-Tronics 702 or 703 series 120 V ac enclosures or; Class I, Div. 2, Groups A, B, C, D; Class II, Div. 2, Groups F

and G; Class III, Div. 2, when used with listed GAI-Tronics 732, 7325, 733 or 7335 series 120 V ac enclosures. Combinations of equipment in

your system are subject to investigation by the local Authority Having Jurisdiction at the time of installation. See full product manual for

additional information at www.gai-tronics.com.

This handset/speaker amplifier mates directly with the 702, 703, 732 and 733 series amplifier enclosures and is suitable for indoor or outdoor use.

The 701-904 SmartSeries Handset/Speaker Amplifier with Auxiliary Jack plugs directly into the enclosure. Use extra care not to damage the

protruding latch wings of connector J2 located on the bottom edge of the amplifier during installation.

It also plugs into standard SmartSeries enclosures such as a SmartSeries station RTU enclosure, an Emergency Party Line (EPL) enclosure, or an

enclosure that houses a party line End-of-Line (EOL) module. When installing the assembly in one of these enclosures, you must also connect the

10-conductor keyed ribbon cable to J2 on the bottom of the Speaker Amp/Power Supply PCBA. Be sure that the red line on the edge of the cable

lines up with J2-pin 1.

Ensure that the connectors mate securely and then tighten the four screws in the corners of the front panel. The following figure shows installation

and adjustment details. Please refer to it when you are installing and adjusting the amplifier.

Figure 1.

1 2

Summary of Contents

Page 1 - Installation

Quick Installation Guide Pub. 42004-719L2BQG GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA 610-777-1374  800-492-1212

Page 2 - Return Policy

(Rev. 10/06)WarrantyEquipment. GAI-Tronics warrants for a period of one (1) year from the date of shipment, that anyGAI-Tronics equipment supplied he

Comments to this Manuals

No comments

Gai-tronics 701-904 SmartSeries Handset/Speaker Amplifier with User Manual

Browse online or download User Manual for Communication Gai-tronics 701-904 SmartSeries Handset/Speaker Amplifier with. GAI-Tronics 701-904 SmartSeries Handset/Speaker Amplifier with Auxiliary Jack User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Communication Gai-tronics 701-904 SmartSeries Handset/Speaker Amplifier with